RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
![background image](/audi/rs_4_quattro_cabriolet/v8-4.2l_(bns)/Page-869007.png)
-
Separate the electrical connector - 2 -.
-
Remove Evaporative Emission (EVAP) Canister Purge Regulator Valve (N80) - 3 - from bracket.
-
Lay aside Evaporative Emission (EVAP) Canister Purge Regulator Valve (N80) with vacuum hose connected.
-
Remove vacuum lines - 1 - and - 3 - to brake booster from distribution piece.
‹› Ignore - 2 -.
‹› In the following illustration, the procedure is shown from behind with engine removed.
-
Remove bolt - 4 - at Secondary Air Injection (AIR) air duct.