RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
![background image](/audi/rs_4_quattro_cabriolet/v8-4.2l_(bns)/Page-892002.png)
4
Camshaft adjuster for intake camshaft
‹› Identification "Intake"
‹› Removing and installing, refer to => [ Camshaft Timing Chains, from 03.2007 ] See: Camshaft Timing Chains, From 03.2007
5
Left camshaft timing chain
‹› Before removing, mark direction of rotation with paint. Reversing the rotation direction of a used chain can destroy it
‹› Remove from camshafts, refer to => [ Camshaft Timing Chains, from 03.2007, Removing from Camshaft ] See: Camshaft Timing Chains,
From 03.2007, Removing From Camshaft
‹› Removing and installing, refer to => [ Camshaft Timing Chains, from 03.2007 ] See: Camshaft Timing Chains, From 03.2007
6
5 Nm plus an additional 90° turn
‹› Replace
7
Guide piece
8
Chain tensioner for left camshaft timing chain
‹› Removing and installing, refer to => [ Camshaft Timing Chains, from 03.2007 ] See: Camshaft Timing Chains, From 03.2007
9
Oil strainer
‹› Set into the chain tensioner
‹› Observe locating tabs on circumference
10
Gasket
‹› Replace
‹› Clipped onto the chain tensioner
11
Mounting bracket for drive sprocket
12
9 Nm
13
Drive sprocket for left camshaft timing chain
14
Thrust washer for drive sprocket
15
Bolt
‹› Replace the M6 bolt
‹› M6: 5 Nm plus an additional 60° turn
‹› M8: 22 Nm
Right camshaft timing chain