RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-894005.png)
‹› Camshaft Clamp (T40070) mounted on both cylinder heads and fastened to 25 Nm - arrows -.
-
Reinstall camshaft adjuster on left cylinder head according to the mark applied during removal.
-
Place camshaft timing chain onto drive sprocket and onto camshaft adjusters and loosely thread in the bolts - 1 and 2 -.
‹› Both camshaft adjusters must be able to still be rotated on camshaft and must not tip.
-
Remove Locking Pin (T40071).