RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-895003.png)
-
Place a new gasket - 3 - onto the rear of the chain tensioner - 1 -.
-
Insert chain tensioner in left cylinder head and position camshaft timing chain according to mark applied during removal, as shown in illustration.
-
Tighten bolts - 1 - and - 2 -.
-
Insert chain tensioner in right cylinder head and position camshaft timing chain according to mark applied during removal, as shown in illustration.
-
Tighten bolts - 1 - and - 2 -.
The rest of installation is in reverse order of removal, note the following: