RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
-
Lay aside air guide pipe to secondary air injection combination valves.
‹› Ignore - 3 -.
-
Remove bolts - 3 - and - 4 -.
-
Slide heat insulation sleeve over right coolant connection hose to side.
-
Loosen hose clamp - 1 -.
-
Remove right coolant pipe from coolant connection hose.
‹› Ignore - 2 - and - 5 -.
-
Remove nuts - 2 - and remove wiring harness bracket from rear coolant pipe.