RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
-
Pre-tighten the nuts in the sequence - 1 to 6 - to 20 Nm.
-
Pre-tighten the nuts in the sequence - 1 to 6 - to 30 Nm.
-
Install left front exhaust pipe. Refer to => [ Left Front Exhaust Pipe with Primary and Main Catalytic Converters ] See: Catalytic
Converter/Service and Repair/Left Front Exhaust Pipe With Primary and Main Catalytic Converters.
Tightening Specifications