RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Discharge Air Temperature Sensor / Switch: Service and Repair
Left Footwell Vent Temperature Sensor G261, Removing And Installing
Left Footwell Vent Temperature Sensor G261, Removing And Installing
-
Remove operating and display module, Climatronic Control Module J255.
-
Reach through opening for operating and display module, Climatronic Control Module J255 and disconnect connector - A -.
-
Give Left Footwell Vent Temperature Sensor G261 - B - approx. 90 degrees turn in direction of arrow.
-
Pull Left Footwell Vent Temperature Sensor G261 out of air conditioner.
NOTE: observe arrangement of connectors to both sensors (Left Footwell Vent Temperature Sensor G261 and Right Footwell Vent Temperature
Sensor G262 to avoid interchange).