RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
-
Remove the accelerator pedal module.
-
Remove screws - A - and - B - between support - C - and the A/C unit.
-
Remove support - C - for the instrument panel cross member (driver side on the center tunnel).
-
Remove the front footwell vent. Refer to => [ Left Front Footwell Vent ] See: Air Register/Service and Repair/Instrument Panel Vents and Air
Ducts
-
Remove the mounting bracket for the brake pedal (and clutch pedal) from the instrument panel cross member.
-
Loosen hex nuts - A - for the left instrument panel cross member and unscrew them by approx. 15 mm.