RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Door Lamp: Service and Repair
Door Safety and Entry Lamp
Interior Lamps
CAUTION!
Before beginning repairs on the electrical system:
‹› Obtain the anti-theft radio security code.
‹› Switch the ignition off.
‹› Disconnect the battery Ground (GND) strap.
‹› After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows
according to Repair Information and/or Owner's Manual.
‹› Steps after reconnecting voltage supply => See: Starting and Charging/Battery/Description and Operation/Battery.
Door Safety and Entry Lamp
‹› Door safety lamp or entry lamp must be removed to replace bulb.
‹› Bulb for door safety lamp: 12 V, 5 W
‹› Bulb for entry lamp: 12 V, 5 W
Removing
-
Using a flat screwdriver, press in retaining tab - 1 - and pry out door safety lamp or entry lamp - 2 -.
-
Unplug connector - 3 -.
-
If present, carefully pry off cover on door safety lamp - arrow -.