RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
-
Disconnect electrical connection - 1 - at low beam bulb.
Installing
Install in reverse order of removal, noting the following:
CAUTION!
‹› Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that
evaporates on the bulb during operation can cause the glass to cloud over.
‹› When installing housing cover, ensure proper seating. Water intrusion will damage headlamp.
-
Insert bulb into housing.
-
Position bulb at lower spring clip.
-
Push bulb beyond resistance of upper spring clips into housing.
-
Reconnect electrical connection and close housing cover.