RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Tail Lamp: Service and Repair
Tail Lamp and Bulb Holder
Tail Lamp and Bulb Holder
Removing
-
Turn the cap in the luggage compartment trim panel - arrow - and remove.
-
Remove bolt - 1 -.
‹› The outer tail lamp can not be removed if the screw is not removed.
‹› - 2 - may not be loosened to remove the tail lamp.
-
Slide the tail lamp - arrows - and disengage it from the pin on the body.
-
Disconnect electrical harness connector at taillight.
-
Turn bulb socket counter-clockwise - arrow - and remove from housing.