RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
^
Installed location:
^
The larger diameter of the wheel bearing faces the hub
5 - Wheel hub
^
Pressing out
^
Pulling off bearing inner race
^
Tie rod version
^
Wheel hub/brake disc contact surfaces and threaded holes are to be free of paint and dirt
^
Light weight wheel hub
Removing
-
Remove wheel covers, remove cover cap on light-alloy wheels (removal hook in vehicle tool kit).
-
Remove drive axle hex bolts (only loosen if vehicle is standing on wheels - risk of accident -).
-
Remove wheel.
-
Secure brake disc with a wheel bolt.
-
Remove ABS speed sensor wiring from wheel bearing housing bracket.
Vehicles with brake caliper HP-2
-
Remove hex bolt - 2 - and remove brake line bracket.
-
Remove bolts - 1 - from brake caliper and remove brake caliper.
-
Reinstall brake line bracket. Install hex bolt - 2 - and tighten.
-
Secure brake caliper to body so that caliper weight does not bend or damage brake line.
Continued for all vehicles
-
Remove brake caliper and secure to body so that weight of caliper does not stress or damage brake hose or brake line.
-
Remove ABS speed sensor screw - 5 -.
-
Remove disc brake.