RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
-
Identify wiring at threaded connections - 2 -, - 3 - and - 5 -.
-
Remove wires at threaded connections.
-
Remove screw - 1 - and nut - 4 -.
-
Unclip fuse panel at 4-pin relay carrier.
-
Detach relays and control modules and then unclip appropriate relay carrier.
‹› Check the exact assignment of 4-pin relay carrier in the current wiring diagram Wiring diagrams, Troubleshooting & Component locations.
Installing
Install in reverse order of removal, observing the following:
-
Install wiring at threaded connections - 2 -, - 3 - and - 5 - according to identification.
-
Connect battery. Required actions => See: Starting and Charging/Battery/Service and Repair/Removal and Replacement/Battery.
-
Install driver's storage compartment.
Tightening Specifications