RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Fuse Block: Service and Repair
Driver Side E-Box
Relay and Fuse Panels
CAUTION!
Before beginning repairs on the electrical system:
‹› Obtain the anti-theft radio security code.
‹› Switch the ignition off.
‹› Disconnect the battery Ground (GND) strap.
‹› After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows
according to Repair Information and/or Owner's Manual.
‹› Steps after reconnecting voltage supply => See: Starting and Charging/Battery/Description and Operation/Battery.
Driver Side E-Box
Removing
-
Remove driver's seat.
-
Remove A-pillar trim.
-
Fold back floor carpet.
-
Disengage cover for driver's side electronics box - arrows - and fold cover to the right.
-
Remove control modules.
‹› Check the exact assignment for driver side electronics box in the current wiring diagram.
‹›
Installing
Installation is the reverse of removal.