RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Wiring Harness: Removal and Replacement
Fiber Optic Cable
Fiber Optic Cable
CAUTION!
Do not excessively bend or kink fiber optic cables. (min. bending radius 25 mm).
=> [ Fiber Optic Cables, Repairing ]
=> [ Fiber Optic Cable, Separating from Wiring Harness Connector ]
Fiber Optic Cables, Repairing
Special tools, testers and auxiliary items required
‹› Fiber Optic Plier Repair Set (VAS 6223)
‹› Air Hose Pliers (VAS 6228)
Checking remaining cut indicator
-
Start by checking remaining cut indicator:
‹› The Pliers For Fiber-optic Conductor (VAS 6223/1 ) cutting device can perform approx. 1260 cuts. The blade is rotated for each further cut.
‹› The remaining cut indicator - arrow - displays the last 150 cuts available.
‹› Once no further cuts are available, the blade is blocked. It must then be replaced => Pliers For Fiber-optic Conductor (VAS 6223/1) instructions.
Preparing Pliers For Fiber Optic Conductor (VAS 6223/1)