RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
-
Release secondary catch - 6 - (blue pin) using a small screwdriver - arrow -.
-
Release retaining tab - 2 - and remove fiber optic cable - 5 - with brass connector pin - 4 - from basic module - 1 -.
Installing
Install in reverse order of removal, observing the following:
-
Install fiber optic cable in line with markings.
‹› Seal open harness connector - 2 - for fiber-optic cable using Protective Cap For Cable Connector (VAS 6223/9) - item 1 -.
‹› Protective cap prevents contamination of or mechanical damage to end face of fiber optic cable which would impair signal transmission.