RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
‹› Dimension - x - = max. 60 mm.
‹› Dimension - x - must not be exceeded, otherwise driveshaft joint and lines on bulkhead can be damaged.
-
Remove electrical harness connectors - 3 - and - 4 - from bracket at transmission.
-
Disconnect electrical harness connectors.
-
Remove heat insulation sleeve on wiring harness and free up individual electrical wires.
-
Remove bolt - 1 - at left front exhaust pipe strap.