RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-1315004.png)
-
Push the combustion chamber seal as fast possible onto the (T10133/5) using the (T10133/6).
-
Turn the (T10133/6) around and push the combustion chamber seal into the groove.
‹› When pushing the combustion chamber seal onto the fuel injector, the seal spreads open. Therefore after pushing it on, it must be tightened again
in 2 steps, as follows.
-
Press (T10133/7) using a gentle turning motion (approximately 180°) on to fuel injector until it stops.
-
Pull the (T10133/7) off again, turning it in the opposite direction.