RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-1315006.png)
-
Tighten bolts - 1, 2, 3, 4, 6, 8 - diagonally in stages.
‹› High pressure line connections must not show any signs of damage.
‹› Do not change the angles of the high pressure lines.
-
Hand-tighten the union nuts for the high-pressure lines.
-
Make sure the high-pressure lines are seated free of stress.
-
To fasten the SW 14 union nut for high pressure line, use ( V.A.G 1331) with (V.A.G 1331/8).
-
Tighten the 17 mm union nut on the high pressure line with the (V.A.G 1331) and (V.A.G 1331/6).