RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
-
Connect (V.A.G 1348/3 A) with (V.A.G 1348/3-3 ) to contact - 1 - using an adapter cable from the (V.A.G 1594 C).
-
Using insulating tape, tape over the second contact of ( V.A.G 1348/3-3) to prevent a short circuit - arrow -.
-
Connect contact - 4 - to vehicle Ground (GND) using a jumper cable from the (V.A.G 1594 C).
-
Route the switch of the (V.A.G 1348/3 A) forward into the engine compartment.
-
Push the cover over the positive terminal pick-off to the right - arrow 1 - and remove it upward - arrow 2 -.
-
Release retaining clip - arrow - and open cover - 2 - over positive terminal pick-off.