RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Relay Box: Service and Repair
9-Way Relay Carrier
Relay and Fuse Panels
CAUTION!
Before beginning repairs on the electrical system:
‹› Obtain the anti-theft radio security code.
‹› Switch the ignition off.
‹› Disconnect the battery Ground (GND) strap.
‹› After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows
according to Repair Information and/or Owner's Manual.
‹› Steps after reconnecting voltage supply => See: Battery/Description and Operation/Battery.
9-Way Relay Carrier
Removing
-
Remove driver's storage compartment.
-
Remove nuts - 3 - and remove Vehicle Electrical System Control Module (J519) with cables connected.
-
Remove 9-way relay carrier - 4 -.
-
Unclip fuse carrier at 9-way relay carrier.
-
Remove relays, control modules, and then unclip respective relay carrier.
‹› Precise location of 9-way relay carrier should be taken from appropriate wiring diagram.