RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
![background image](/audi/rs_4_quattro_cabriolet/v8-4.2l_(bns)/Page-1090002.png)
-
Remove hose clamps - 1 - and - 3 - and lay air guide hose aside.
CAUTION!
Hose connectors - 4 - must not be opened.
-
Disconnect electrical harness connector - 3 - at Mass Air Flow (MAF) Sensor (G70).
-
Remove hose - 1 - to Secondary Air Injection (AIR) pump by pressing release buttons.
-
Disconnect air guide hose - 4 - at Mass Air Flow (MAF) sensor.
-
Free up wiring harness - 2 - at air filter housing.
-
Remove screws - arrows - and remove the air filter housing upper section.
Installing
Installation is in reverse order of removal, note the following.
For trouble-free function of the Mass Air Flow (MAF) sensor, it is important to observe the following notes and perform the work procedures exactly.