RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Air Bag: Removal and Replacement
Return Ring With Slip Ring
Return Ring with Slip Ring
Special tools, testers and auxiliary items required
‹› Special Screwdriver T8 (T40056)
Removing
-
Remove the driver airbag unit.
-
Remove the steering wheel.
-
Pull steering column all the way out and down.
-
Remove the TORX bolts with the T8 screwdriver ( T40056)- 3 - and - 5 - as well as the hex socket head bolt - 4 -.
-
Tightening specification 1 Nm.
-
Disconnect upper steering column switch trim - 2 - from lower trim - 1 - and remove both parts.
When installing, guide upper trim into lower trim hooks, press both parts together and bolt.
-
Disconnect connector - 1 -.
-
Carefully release catch - arrows - and pull return spring with slip ring from steering column switches.