RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Fuel Gauge Sender: Service and Repair
Fuel Level Sensor 2
Fuel Level Sensor 2
Special tools, testers and auxiliary items required
‹› Wrench (T10202)
Removing
Observe safety precautions. Refer to => [ Safety Precautions ] See: Powertrain Management/Fuel Delivery and Air Induction/Service
Precautions/Vehicle Damage Warnings/Safety Precautions/Fuel Supply System.
Observe rules for cleanliness. Refer to => [ Clean Working Conditions ] See: Powertrain Management/Fuel Delivery and Air Induction/Service
Precautions/Vehicle Damage Warnings/Clean Working Conditions/Fuel Supply System.
CAUTION!
‹› To remove Fuel Level Sensor 2 (G169), the fuel tank may only be filled to a maximum of 1/4. Empty fuel tank if necessary. Refer to =>
[ Fuel Tank, Draining ] See: Powertrain Management/Fuel Delivery and Air Induction/Description and Operation.
‹› Observe safety precautions when disconnecting the battery.
All except Audi RS4:
-
Push the cover over the battery toward the right - arrow 1 - and remove it upward - arrow 2 -.
-
With ignition switched off, disconnect Battery Ground (GND) cable - arrow -.