RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Fuse Block: Service and Repair
3-Position Relay Carrier
3-Position Relay Carrier
Removing
CAUTION!
‹› Switch off all electrical consumers.
‹› Switch ignition off and remove ignition key.
-
Where applicable, remove driver's storage compartment.
-
Remove screws - 1 - and detach 3-position relay carrier - 2 -.
‹› Disregard - 3 - and - 4 -.
-
Unclip the fuse carriers at the 3-position relay carrier.
-
Remove relays and control modules and then unclip appropriate relay carrier.
‹› Refer to the applicable wiring diagram for exact identification of connections on relay carrier => Wiring Diagrams.
Installing
Install in reverse order of removal, noting the following:
-
Install driver's storage compartment.