RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Wiring Harness: Removal and Replacement
Primary Lock
Primary Lock
-
The primary lock is the locking mechanism of an individual crimp contact in the terminal housing.
-
If necessary, housing securing mechanisms (secondary locks) must be released or removed using specified tool before releasing the contacts.
-
The shapes of the primary locks depicted in the following are only a selection which, as an example, should make clear the various functions of the
secondary lock.
-
Allocation of the correct release tool to the respective locking mechanism VAS 1978/35 operating instructions.