RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
-
Disengage connector lock - 1 - in direction of - arrow - in order to release connector - 2 -.
-
Carefully remove steering column switch module.
Installing
Install in reverse order of removal, noting the following:
-
Ensure all fasteners and electrical connectors are properly connected and locked into place.
-
Insert upper steering column trim in hooks for bottom trim, press both sections together and tighten screws.
-
Install steering wheel and driver's airbag.
Tightening Specifications