RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
^
Ribbed belt/ribbed belt tension OK
^
System has no leaks
^
Hoses/lines not kinked or restricted
Checking
-
Clamp off suction and return line with hose clamps up to 25 mm dia. 3094.
-
Remove noise insulation
Pressure hose is not removed at power steering pump to check delivery pressure. Connection of Power steering test unit V.A.G 1402 takes place at
line connection - arrow - at lower left of engine compartment.
-
Place drip pan V.A.G 1306 under separation point to collect escaping hydraulic oil.
-
Disconnect line connection - arrow -.
-
Install Power steering test unit V.A.G 1402 as shown in illustration.
1 - Pressure hose
2 - Adapter V.A.G 1402/4