RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
3 - Spring clamp
‹› Always replace
4 - Boot
‹› Check for damage
‹› Must not be twisted after toe is adjusted
‹› Can be replaced with steering gear installed
‹› Remove to replace tie rods, refer to => [ Tie Rods ] See: Tie Rod/Service and Repair/Tie Rods.
5 - Sealing ring
‹› Always replace
6 - Power-assisted steering gear
‹› Grease rack with steering gear grease A0F 063 000 04
7 - Ear hose clamp
‹› Always replace
‹› Tension using (V.A.G 1275)
8 - Tie rod, 100 Nm
‹› Removing and installing, refer to => [ Tie Rods ] See: Tie Rod/Service and Repair/Tie Rods.
‹› Grease joint with steering gear grease A0F 063 000 04