RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
-
Insert suspension strut hex bolts at control arm.
-
Guide the track control arms and guide links into subframe.
Before tightening the subframe, it must be fixed to the body using Testing Mandrel (3393).
-
Holes - 1 - and - 2 - of the subframe and hole - 3 - of the aluminum bracket must line up on both sides.
‹› Fixing the carrier in this way is a substitute for a subsequent axle alignment only when:
‹› The sub-frame is removed completely and installed.
‹› Holes - 1 - and - 2 - lined up before the repair.
-
Position hex bolts - 1 - and - 2 -.
-
Protect holes in body for mounting Testing Mandrel (3393) against corrosion.