RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Level Control Solenoid Valve: Service and Repair
Central Valve
Removing
-
Remove plastic cover - 1 -.
CAUTION!
Always wear safety goggles!
‹› The DRC lines must be extracted before disconnecting them from the central valve. Refer to => [ Dynamic Ride Control, Emptying and Filling ]
See: Service and Repair.
‹› Perform this step on both wiring harnesses on the central valve.
-
Remove union nuts - 9 - and - 10 - or - 11 - and - 12 -, depending on the central valve.
-
Remove nuts - 2 - or - 5 -, depending on the central valve.