RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Tire Pressure Sensor: Service and Repair
Metal Valve Body
Metal Valve Body,
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1410)
-
Place metal valve with rubber seal through rim from inside.
-
Position beveled washer and union nut from outside and tighten => [ (Item 7) Union nut ] See: Tire Monitoring System/Service and
Repair/Removal and Replacement/Wheel Electronics Assembly Overview.
-
Secure against turning with counterhold - 1 - (e.g. drill bit 2 mm dia.).
-
Press wheel electronics - 1 - into bed and fasten at rear of valve with microencapsulated bolt => [ (Item 6) Microencapsulated bolts ] See: Tire
Monitoring System/Service and Repair/Removal and Replacement/Wheel Electronics Assembly Overview.