RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-1434001.png)
Clutch Master Cylinder: Service and Repair
Clutch Master Cylinder, Removing and Installing
Clutch master cylinder, removing and installing - 6 Spd. Manual Transmission 0A3 All Wheel Drive
Special tools, testers and auxiliary items required
^
Hose clamps, up to 25 mm diameter 3094
^
Pliers V.A.G 1922
Removing
CAUTION!
^
Follow steps required when disconnecting battery.
^
On vehicles equipped with a telematics system, activate the telematics control module service mode before disconnecting the battery.
-
Pull off rubber seal on plenum chamber in direction of - arrow -
-
Remove cover - 1 -from plenum chamber.
-
With the ignition switched off, disconnect battery ground (GND) strap.
