RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-1438005.png)
-
Guide clutch slave cylinder - 1 - into transmission housing mounting hole without great sideways movement from working direction of plunger -
arrow A -.
-
While doing this, insert into recess - arrow B - of clutch release lever - 3 -.
-
Tighten the clutch slave cylinder - 1 - with a new bolt - 2 -. Tightening specification => [ (Item 2) Internal hex bolt, 23 Nm ] See: Clutch Release
Bearing/Service and Repair/0A3A Transmission/Clutch Release Mechanism Assembly Overview.
‹› If clutch slave cylinder is guided in at angle, there is the danger that the plunger - arrow A - could be guided past the recess - arrow B -.
CAUTION!