RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Drive/Propeller Shaft: Removal and Replacement
Driveshaft, Disconnecting From Rear Final Drive
Driveshaft, Disconnecting from Rear Final Drive
^
The driveshaft should only be worked on a two column lift.
-
Loosen clamping sleeves - 1 - and - 2 - and remove rear part of exhaust system.
-
Check whether there is a marking (colored marking) on driveshaft and at flange/driveshaft at rear final drive.
-
If this marking is not present, then mark in color the position of driveshaft flange - arrow A - to rear final drive - arrow B -.
-
Remove mounting bolts - arrows - on rear CV joint with parking brake engaged and remove driveshaft.