RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
![background image](/audi/rs_4_quattro_cabriolet/v8-4.2l_(bns)/Page-1511005.png)
3
Sealing ring
4
Groove in triple roller joint
-
Insert axle shaft in vise.
-
Lightly press on cover - 1 - from repair kit so that circlip from the repair kit can be inserted.
-
Insert circlip from repair kit all around below engaging groove.
‹› Make sure circlip engages audibly.
-
Position joint in center position. See "min" - " max" position.