RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
![background image](/audi/rs_4_quattro_cabriolet/v8-4.2l_(bns)/Page-1522004.png)
Protective boot and cap contact surfaces must be free of grease!
-
Press on joint until stop.
Chamfer on inner diameter of ball hub (splines) must face contact shoulder of drive axle.
Use special tool shown in illustration.
Press block 40-204 A and clamping surfaces on drive axle, must be free of grease.
-
Install circlip