RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
![background image](/audi/rs_4_quattro_cabriolet/v8-4.2l_(bns)/Page-1514003.png)
-
Align drive axle holes and flange shaft/transmission holes with each other, install bolts - 1 - and tighten, (100 mm dia.).
-
Insert cover, install combi-bolts - 2 - and tighten.
-
Install coil spring.
-
Install new collar bolt and tighten to specified torque without turning any farther.
-
Mount wheel and tighten.
-
Lower vehicle onto its wheels.
-
Tighten collar bolt to specified additional turn angle.