RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Wheel Bearing: Removal and Replacement
Bolted Wheel Bearing Unit
Bolted Wheel Bearing Unit
Special tools, testers and auxiliary items required
‹› Thrust Plate (VW 401)
‹› Thrust Plate (VW 402)
‹› Sleeve (VW 416 B)
‹› Punch (VW 412)
‹› Punch (VW 407)
‹› Sleeve (VW 519)
‹› Puller (3- Kukko 15-17)
‹› Engine/Transmission Jack (V.A.G 1383 A)
Removing
-
Drive axle, removing and installing. Refer to => [ Drive Axles ] See: Axle Shaft Assembly/Service and Repair/Removal and Replacement/Rear
Suspension/Drive Axles.
-
Remove securing bolts - 1 - from brake caliper.
-
Remove brake caliper and hang on body.
-
Remove disc brake.
-
Remove cap bolts - 1 - and - 2 -