RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Differential: Removal and Replacement
Overview
Torsen Housing
Special tools, testers and auxiliary items required
‹› Thrust plate (VW 401)
‹› Thrust plate (VW 402)
‹› Punch (VW 408 A)
‹› Punch (VW 412)
‹› Thrust plate (VW 454)
‹› Thrust plate (VW 554)
‹› Punch (2005)
‹› Thrust plate (2050)
‹› Seal driver-front wheel bearing (30 - 100)
‹› Torque wrench (VAG 1331)
‹› Pulling hook (T20143)
‹› Thrust plate (T40106)
‹› Adjustment shim (016 311 391 A)
‹› Thread locking compound (AMV 185 101 A1)
‹› Sealing grease (G 052 128 A1)
Press off flange shaft (torsen housing with vibration dampener)
-
Remove circlip before pressing out flange shaft.
-
Position torsen housing so that flange shaft does not come in contact with assembly plate when pressing off - arrows -.
Press off flange shaft (torsen housing without vibration dampener)