RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
![background image](/audi/rs_4_quattro_cabriolet/v8-4.2l_(bns)/Page-1477004.png)
CAUTION!
If circlip is over-stretched or damaged, it must be replaced by a new circlip of the same thickness.
-
Install 2 hex bolts M 8 x 30 - arrow - in flange.
-
Place drip tray underneath.
-
Pull off drive shaft flange using puller (VW 391 ).
-
Carefully push oil seal on top, outer circumference - arrow - slightly inward.