RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
‹› Tighten collared shoulder bolts - 4 - hand tight.
‹› Lightly press window frame - 1 - inward at top.
‹› Tighten bolts - 3 - and - 10 - to 32 Nm.
‹› Tighten collared shoulder bolts - 4 - to 32 Nm.
‹› Tighten bolt - 8 - to 10 Nm.
‹› Tighten locating bolt - arrows - in window frame to 32 Nm.
‹› Knock in lower half of door seal into inner door plate.
‹› Secure window regulator rail with bolt - 7 - to inner door plate.
‹› Press threaded pin of window regulator reel through inner door plate until it engages => [ Window regulator motor, removing and installing ].
Window regulator motor, removing and installing