RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
6
Left A-pillar trim
‹› Removal is same as right trim.
7
Nut
‹› 6.5 Nm
8
Retaining clamp
‹› Movable
9
Retaining clamp
‹› Fixed
10
Retaining clamp
‹› Movable
A-pillar trim, removing
-
Remove door seal in A-pillar area and remove A-pillar trim.
-
Remove nut - 6 -.
-
Drill rivet heads off hollow rivets - 2 - and - 7 - and knock rivet shafts through.
-
Remove trim - 1 -.
-
Upper and lower retaining clips - 3 - must move to balance out tolerances.
-
Retaining clip - 5 - is fixed. It is secured to A-pillar with hollow rivets - 4 -.