RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
/Page-3268001.png)
Cowl Moulding / Trim: Service and Repair
Cowl Panel Trim
1 - Cowl trim
‹› Windshield wiper arms removed.
‹› Plenum chamber cover removed.
‹› Pull out securing pins - 4 -.
‹› Remove trim from retaining strip at windshield, bottom.
‹› Remove trim upward.
‹› When installing, make sure that the trim engages completely into retaining strip.
2 - Support
3 - Windshield
4 - Securing pin
5 - Plenum chamber cover
‹› Remove gasket - 6 - and remove cover from cowl panel trim
6 - Gasket
