RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
Backup Lamp Switch: Service and Repair
Reversing Light Switch, Removing
Reversing light switch, removing, 0A3, 6-Speed All Wheel Drive M/T
Special tools, testers and auxiliary items required
^
Torque wrench V.A.G 1331
-
If installed, loosen quick release fasteners - 3 - and remove rear noise insulation - B -.
-
Disconnect connector - arrow - for reversing light switch on right side of transmission.
-
Unscrew reversing light switch - arrow - from selector shaft cover.