RS 6 V8-4.2L Turbo (BCY) (2003)
/Page-1541003.png)
Display on VAS 5051:
Test requirement:
^
Engine idling.
-
Check readouts in display zones -3- and -4-.
-
Take vehicle for a test drive.
-
Check readouts in display zones -3- and -4-.
-
Press the (arrow) button to exit from function "08 - Read data block".
If specifications are not obtained:
-
Test solenoid valves for camshaft adjustment.
Note: If only a value between 6.0° cr/shaft and 16.0 "cr/shaft is displayed during test, electric valve for camshaft adjustment is correctly
transferring oil pressure to mechanical camshaft adjuster, but mechanical adjuster cannot reach its end position (for example, because it is not
moving freely).
