RS 6 V8-4.2L Turbo (BCY) (2003)
Air Flow Meter/Sensor: Testing and Inspection
Mass Air Flow (MAF) Sensor -G70-, Checking
Mass Air Flow (MAF) Sensor -G70-, Checking
NOTE: The V8 biturbo engine is fitted with two mass air flow sensors. -G70- measures the intake air mass of cylinder bank 1 (cylinders 1 to 4) and -
G246- that of cylinder bank 2 (cylinders 5 to 8).
Requirements
-
Coolant temperature at least 80 degree C
-
Electrical loads switched off (radiator coolant fan must not run during test)
-
Air conditioner switched off.
Checking operation
-
Connect vehicle diagnostic, testing and information system VAS 5051 and select vehicle system "01 - Engine electronics" from list. Engine must
be idling. See: Computers and Control Systems/Testing and Inspection/Scan Tool Testing and Procedures/Scan Tool Connecting and Initial
Checks/Connecting VAS 5051 Scan Tool
Indicated on VAS 5051:
-
From list -1- select diagnostic function "04 - Basic setting".
Indicated on VAS 5051:
1
Enter display group
-
Use keypad -2- to enter "002" for "Display group number 002" and confirm by touching Q key.
Indicated on VAS 5051: