RS 6 V8-4.2L Turbo (BCY) (2003)
Power Mirror Switch: Service and Repair
Switch For Mirror Adjustment, Removing and Installing
Vehicles with manual transmission:
Removing
-
Lever off center console insert and shifter boot upward.
-
Using hand, press mirror adjustment switch -1- from bottom upward and out, starting from center console.
-
Disconnect electrical harness connector -2- at mirror adjustment switch -1-.
Installing
Installation is the reverse of removal.
NOTE: When installing, be sure that no retaining clips are missing at front and rear of mirror adjustment switch.
Vehicles with automatic transmission
Removing
-
Pry center console insert upward and off.
-
Carefully insert a screwdriver in the hole at right next to the two mounting bolts for the center console.
-
Lever out mirror adjustment switch -1- by pressing lightly using a screwdriver, as soon as the screwdriver touches the lower section.
-
Disconnect electrical harness connector -2- at mirror adjustment switch -1-.
Installing