S4 V8-4.2L (BHF) (2004)
-
Removal:
-
Remove lower rear lid trim.
-
Remove bolts - 1 - (2x).
-
Press spring clamps on trim sides off of rear lid (Qty. 4).
-
Remove spring clips - 3 - on upper trim from rear lid (4x).
-
Installing:
Installation is reverse of removal. Observe the following when doing so:
-
Before installing upper lid trim -2 -, make sure rubber buffers - 4 - (8x) are installed.
-
Guide upper rear lid trim behind rear lid side window frames.
-
Clip in trim at top first and then at sides.
3
-
Spring clips (Qty. 8)
4
-
Rubber buffer (Qty. 8)