S4 V8-4.2L (BHF) (2004)
Note:
^
Thread in body can be repaired using wire thread insert according to DIN 8140 (Helicoil). The thread insert must be of the same length as the
thread in the body.
^
Bonded rubber bushings can only be turned to a limited extent. The bolted joints at the suspension links are not to be tightened until the
vehicle is standing on the ground.
-
Tighten hex bolts - 2 - and - 5 -.
-
Tighten hex bolts - 1 -.
-
Tighten nuts for transmission mounts - arrows -.
-
Tighten bolt - 2 -.
-
Tighten nut - 1 - for engine mount.